MSI Q35MDO Intel ICH9R SATA RAID Floppy Driver

MSI Q35MDO Intel ICH9R SATA RAID Floppy Driver descriptionCPU- Supports Intel Core 2 Quad/Core 2 Duo

Last update 11 Dec. 2013 Licence Free OS Support Windows Downloads Total: 545 | Last week: 2 Ranking #811 in Miscellaneous Publisher Intel

Users rating:

MSI Q35MDO Intel ICH9R SATA RAID Floppy Publisher's Description

MSI Q35MDO Intel ICH9R SATA RAID Floppy Driver descriptionCPU
- Supports Intel Core 2 Quad/Core 2 Duo based processors in LGA775 package.
- Supports Intel Yorkfield, Wolfdale.
- Supports FSB 1333/1066/800 MHz.
Please refer to CPU Support for compatible CPU; the above description is for reference only.

Chipset
- Intel Q35 Chipset
- Supports FSB 800/1066/1333MHz.
- Supports dual channel, DDR2 667/800.
- Integrated Intel Graphics Media Accelerator X3500
- Maximum shared memory of 384 MB
- Supports Microsoft DirectX 10, OpenGL 2.0, Pixel Shader
- Intel ICH9DO Chipset
- Hi-Speed USB (USB2.0) controller, 480Mb/sec, up to 12 ports.
- 4 SATAII ports with 2 *eSATA ports with transfer rate up to 3Gb/s.
- PCI Master v2.3, I/O APIC.
- ACPI 2.0 compliant.
- Serial ATA RAID 0/1//5/10 or JBOD mode by ICH9DO.
- Integrated AHCI controller by ICH9DO.
*eSATA function would be fully supported by VISTA ( In Box driver with AHCI driver). eSATA function would not be fully supported without AHCI driver under WinXP.

Main Memory
- Supports four unbuffered DIMM of 1.8 Volt DDR2 SDRAM
- Supports up to 8GB memory size.
- Supports dual channel DDR2 memory architecture.
- Supports DDR2 667/800 memory interface.

Slots
- One PCI Express 16X slot (PCI Express Bus SPEC V1.0a compliant)
- One PCI Express x1 slot. (support PCI Express Bus specification v1.0a compliant)
- Two 32-bit v2.3 master PCI bus slots.
- Support 3.3v/5v PCI bus interface.

On-Board IDE/SATA
- One Ultra DMA 66/100/133 IDE controller integrated in Marvell 88SE6111.
- Supports PIO, Bus Master operation modes.
- Can connect up to two Ultra ATA drives.
- SATAII controller integrated in ICH9DO and Marvell 88SE6111 chipset
- Up to 3Gb/s transfer speed.
- Supports 4 SATAII ports by ICH9DO with 2 eSATA ports.
- Supports AHCI controller with SATA RAID 0/1/5/10 or JBOD mode by ICH9DO.
- Supports one SATAII port by 88SE6111.
MSI Reminds You...
- The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.

Audio
- Chip integrated by Realtek AL888
- Flexible 8-channel audio with jack sensing
- Compliant with Azalia 1.0 spec.

LAN
- Supports PCI Express LAN 10/100/1000 Fast Ethernet by Intel 82566-DM.

IEEE1394 / FireWire
- VIA VT6308 chipset
- Supports up to two 1394 ports. (Rear panel x1, pinheader x1)
- Transfer rate is up to 400Mbps.

TPM
- Supports TPM by INFINEON SLB9635TT12.

Internal I/O Connectors
- ATX 24-Pin power connector
- ATX 4-pin 12V power connector
- CPU x 1 / System x 1 FAN connectors
- CD-in connector
- Front panel audio connector
- Front panel connector
- 1 x SPDIF-out pinheader
- 1 x chasis intrusion connector
- 1 x serial port pinheader
- 3 x USB 2.0 connectors
- 1 x Floppy disk drive connector
- 5 x Serial ATAII connectors (optional)
- 1 x ATA133 connector
- 1 x IEEE1394 connector support additional 1 port (optional)
MSI Reminds You...
- The floppy disk cable will be optional.

Back Panel I/O Ports
- 1 x PS/2 keyboard
- 1 x PS/2 mouse
- 2 x eSATA ports (please refer to Intel website for eSATA function)
- 1 x Graphic Card port
- 1 x 6 in 1 audio jack
- 6 x USB 2.0 ports
- 1 x RJ45 LAN jack
- 1 x IEEE1394 port (optional)

BIOS
- The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and expansion cards of the board automatically.
- The mainboard provides a Desktop Management Interface(DMI) function which records your mainboard specifications.

Dimension
- 24.4cm(L) x 24.4cm(W) mATX Form Factor

It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.